hvl_ccb.dev.technix¶
Device classes for “RS 232” and “Ethernet” Interfaces which are used to control power supplies from Technix. Manufacturer homepage: https://www.technix-hv.com
The Regulated power Supplies Series and Capacitor Chargers Series from Technix are series of low and high voltage direct current power supplies as well as capacitor chargers. The class Technix is tested with a CCR10KV-7,5KJ via an ethernet connection as well as a CCR15-P-2500-OP via a serial connection. Check the code carefully before using it with other devices or device series
- This Python package may support the following interfaces from Technix:
-
class
Technix
(com, dev_config)[source]¶ Bases:
hvl_ccb.dev.base.SingleCommDevice
-
static
config_cls
()[source]¶ Return the default configdataclass class.
- Returns
a reference to the default configdataclass class
-
property
current
¶
-
default_com_cls
() → Union[Type[hvl_ccb.dev.technix.TechnixSerialCommunication], Type[hvl_ccb.dev.technix.TechnixTelnetCommunication]][source]¶ Get the class for the default communication protocol used with this device.
- Returns
the type of the standard communication protocol for this device
-
get_status_byte
() → hvl_ccb.dev.technix.TechnixStatusByte[source]¶
-
property
hv
¶
-
property
inhibit
¶
-
property
max_current
¶
-
property
max_voltage
¶
-
property
remote
¶
-
property
voltage
¶
-
property
voltage_regulation
¶
-
static
-
class
TechnixCommunication
(config)[source]¶ Bases:
hvl_ccb.comm.base.SyncCommunicationProtocol
,abc.ABC
Generic communication class for Technix, which can be implemented via TechnixSerialCommunication or TechnixTelnetCommunication
-
query
(command: str) → str[source]¶ Send a command to the interface and handle the status message. Eventually raises an exception.
- Parameters
command – Command to send
- Raises
TechnixError – if the connection is broken
- Returns
Answer from the interface
-
-
class
TechnixCommunicationConfig
(terminator: bytes = b'\r', encoding: str = 'utf-8', encoding_error_handling: str = 'replace', wait_sec_read_text_nonempty: Union[int, float] = 0.5, default_n_attempts_read_text_nonempty: int = 10)[source]¶ Bases:
hvl_ccb.comm.base.SyncCommunicationProtocolConfig
-
force_value
(fieldname, value)¶ Forces a value to a dataclass field despite the class being frozen.
NOTE: you can define post_force_value method with same signature as this method to do extra processing after value has been forced on fieldname.
- Parameters
fieldname – name of the field
value – value to assign
-
classmethod
keys
() → Sequence[str]¶ Returns a list of all configdataclass fields key-names.
- Returns
a list of strings containing all keys.
-
classmethod
optional_defaults
() → Dict[str, object]¶ Returns a list of all configdataclass fields, that have a default value assigned and may be optionally specified on instantiation.
- Returns
a list of strings containing all optional keys.
-
classmethod
required_keys
() → Sequence[str]¶ Returns a list of all configdataclass fields, that have no default value assigned and need to be specified on instantiation.
- Returns
a list of strings containing all required keys.
-
terminator
: bytes = b'\r'¶ The terminator is CR
-
-
class
TechnixConfig
(communication_channel: Union[Type[hvl_ccb.dev.technix.TechnixSerialCommunication], Type[hvl_ccb.dev.technix.TechnixTelnetCommunication]], max_voltage: Union[int, float], max_current: Union[int, float], polling_interval_sec: Union[int, float] = 4, post_stop_pause_sec: Union[int, float] = 1, register_pulse_time: Union[int, float] = 0.1)[source]¶ Bases:
object
-
clean_values
()¶ Cleans and enforces configuration values. Does nothing by default, but may be overridden to add custom configuration value checks.
-
communication_channel
: Union[Type[hvl_ccb.dev.technix.TechnixSerialCommunication], Type[hvl_ccb.dev.technix.TechnixTelnetCommunication]]¶ communication channel between computer and Technix
-
force_value
(fieldname, value)¶ Forces a value to a dataclass field despite the class being frozen.
NOTE: you can define post_force_value method with same signature as this method to do extra processing after value has been forced on fieldname.
- Parameters
fieldname – name of the field
value – value to assign
-
is_configdataclass
= True¶
-
classmethod
keys
() → Sequence[str]¶ Returns a list of all configdataclass fields key-names.
- Returns
a list of strings containing all keys.
-
max_current
: Union[int, float]¶ Maximal Output current
-
max_voltage
: Union[int, float]¶ Maximal Output voltage
-
classmethod
optional_defaults
() → Dict[str, object]¶ Returns a list of all configdataclass fields, that have a default value assigned and may be optionally specified on instantiation.
- Returns
a list of strings containing all optional keys.
-
polling_interval_sec
: Union[int, float] = 4¶ Polling interval in s to maintain to watchdog of the device
-
post_stop_pause_sec
: Union[int, float] = 1¶ Time to wait after stopping the device
-
register_pulse_time
: Union[int, float] = 0.1¶ Time for pulsing a register
-
classmethod
required_keys
() → Sequence[str]¶ Returns a list of all configdataclass fields, that have no default value assigned and need to be specified on instantiation.
- Returns
a list of strings containing all required keys.
-
-
class
TechnixSerialCommunication
(configuration)[source]¶ Bases:
hvl_ccb.dev.technix.TechnixCommunication
,hvl_ccb.comm.serial.SerialCommunication
-
class
TechnixSerialCommunicationConfig
(terminator: bytes = b'\r', encoding: str = 'utf-8', encoding_error_handling: str = 'replace', wait_sec_read_text_nonempty: Union[int, float] = 0.5, default_n_attempts_read_text_nonempty: int = 10, port: Union[str, NoneType] = None, baudrate: int = 9600, parity: Union[str, hvl_ccb.comm.serial.SerialCommunicationParity] = <SerialCommunicationParity.NONE: 'N'>, stopbits: Union[int, float, hvl_ccb.comm.serial.SerialCommunicationStopbits] = <SerialCommunicationStopbits.ONE: 1>, bytesize: Union[int, hvl_ccb.comm.serial.SerialCommunicationBytesize] = <SerialCommunicationBytesize.EIGHTBITS: 8>, timeout: Union[int, float] = 2)[source]¶ Bases:
hvl_ccb.dev.technix.TechnixCommunicationConfig
,hvl_ccb.comm.serial.SerialCommunicationConfig
-
force_value
(fieldname, value)¶ Forces a value to a dataclass field despite the class being frozen.
NOTE: you can define post_force_value method with same signature as this method to do extra processing after value has been forced on fieldname.
- Parameters
fieldname – name of the field
value – value to assign
-
classmethod
keys
() → Sequence[str]¶ Returns a list of all configdataclass fields key-names.
- Returns
a list of strings containing all keys.
-
classmethod
optional_defaults
() → Dict[str, object]¶ Returns a list of all configdataclass fields, that have a default value assigned and may be optionally specified on instantiation.
- Returns
a list of strings containing all optional keys.
-
classmethod
required_keys
() → Sequence[str]¶ Returns a list of all configdataclass fields, that have no default value assigned and need to be specified on instantiation.
- Returns
a list of strings containing all required keys.
-
-
class
TechnixTelnetCommunication
(configuration)[source]¶ Bases:
hvl_ccb.comm.telnet.TelnetCommunication
,hvl_ccb.dev.technix.TechnixCommunication
-
class
TechnixTelnetCommunicationConfig
(terminator: bytes = b'\r\n', encoding: str = 'utf-8', encoding_error_handling: str = 'replace', wait_sec_read_text_nonempty: Union[int, float] = 0.5, default_n_attempts_read_text_nonempty: int = 10, host: Union[str, NoneType] = None, port: int = 4660, timeout: Union[int, float] = 0.2)[source]¶ Bases:
hvl_ccb.comm.telnet.TelnetCommunicationConfig
,hvl_ccb.dev.technix.TechnixCommunicationConfig
-
force_value
(fieldname, value)¶ Forces a value to a dataclass field despite the class being frozen.
NOTE: you can define post_force_value method with same signature as this method to do extra processing after value has been forced on fieldname.
- Parameters
fieldname – name of the field
value – value to assign
-
classmethod
keys
() → Sequence[str]¶ Returns a list of all configdataclass fields key-names.
- Returns
a list of strings containing all keys.
-
classmethod
optional_defaults
() → Dict[str, object]¶ Returns a list of all configdataclass fields, that have a default value assigned and may be optionally specified on instantiation.
- Returns
a list of strings containing all optional keys.
-
port
: int = 4660¶ Port at which Technix is listening
-
classmethod
required_keys
() → Sequence[str]¶ Returns a list of all configdataclass fields, that have no default value assigned and need to be specified on instantiation.
- Returns
a list of strings containing all required keys.
-