hvl_ccb.dev.labjack

Submodules

• hvl_ccb.dev.labjack.labjack
  • Extra installation
  • LabJack
    • LabJack.AInRange
      • LabJack.AInRange.ONE
      • LabJack.AInRange.ONE_HUNDREDTH
      • LabJack.AInRange.ONE_TENTH
      • LabJack.AInRange.TEN
      • LabJack.AInRange.value
    • LabJack.BitLimit
      • LabJack.BitLimit.THIRTY_TWO_BIT
    • LabJack.CalMicroAmpere
      • LabJack.CalMicroAmpere.TEN
      • LabJack.CalMicroAmpere.TWO_HUNDRED
    • LabJack.CjcType
      • LabJack.CjcType.internal
      • LabJack.CjcType.lm34
    • LabJack.ClockFrequency
      • LabJack.ClockFrequency.FIVE_MHZ
      • LabJack.ClockFrequency.FORTY_MHZ
      • LabJack.ClockFrequency.MAXIMUM
      • LabJack.ClockFrequency.MINIMUM
      • LabJack.ClockFrequency.TEN_MHZ
      • LabJack.ClockFrequency.TWELVE_HUNDRED_FIFTY_KHZ
      • LabJack.ClockFrequency.TWENTY_FIVE_HUNDRED_KHZ
      • LabJack.ClockFrequency.TWENTY_MHZ
    • LabJack.DIOChannel
    • LabJack.DIOStatus
      • LabJack.DIOStatus.HIGH
      • LabJack.DIOStatus.LOW
    • LabJack.DeviceType
      • LabJack.DeviceType.ANY
      • LabJack.DeviceType.T4
      • LabJack.DeviceType.T7
      • LabJack.DeviceType.T7_PRO
      • LabJack.DeviceType.get_by_p_id()
    • LabJack.TemperatureUnit
      • LabJack.TemperatureUnit.C
      • LabJack.TemperatureUnit.F
      • LabJack.TemperatureUnit.K
    • LabJack.ThermocoupleType
      • LabJack.ThermocoupleType.C
      • LabJack.ThermocoupleType.E
      • LabJack.ThermocoupleType.J
      • LabJack.ThermocoupleType.K
      • LabJack.ThermocoupleType.NONE
      • LabJack.ThermocoupleType.PT100
      • LabJack.ThermocoupleType.PT1000
      • LabJack.ThermocoupleType.PT500
      • LabJack.ThermocoupleType.R
      • LabJack.ThermocoupleType.S
      • LabJack.ThermocoupleType.T
    • LabJack.config_high_pulse()
    • LabJack.default_com_cls()
    • LabJack.disable_pulses()
    • LabJack.enable_clock()
    • LabJack.get_ain()
    • LabJack.get_cal_current_source()
    • LabJack.get_clock()
    • LabJack.get_digital_input()
    • LabJack.get_product_id()
    • LabJack.get_product_name()
    • LabJack.get_product_type()
    • LabJack.get_sbus_rh()
    • LabJack.get_sbus_temp()
    • LabJack.get_serial_number()
    • LabJack.read_resistance()
    • LabJack.read_thermocouple()
    • LabJack.send_pulses()
    • LabJack.set_ain_differential()
    • LabJack.set_ain_range()
    • LabJack.set_ain_resistance()
    • LabJack.set_ain_resolution()
    • LabJack.set_ain_thermocouple()
    • LabJack.set_analog_output()
    • LabJack.set_clock()
    • LabJack.set_digital_output()
    • LabJack.start()
    • LabJack.stop()
  • LabJackError
  • LabJackIdentifierDIOError

Module contents

A LabJack T-series devices wrapper around the LabJack’s LJM Library; see https://labjack.com/ljm . The wrapper was originally developed and tested for a LabJack T7-PRO device.

Extra installation

To use this LabJack T-series devices wrapper:

1. install the hvl_ccb package with a labjack extra feature:

   $ pip install "hvl_ccb[labjack]"
   

   this will install the Python bindings for the library.

2. install the library - follow instruction in https://labjack.com/support/software/installers/ljm .